biodex 950-146 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 36

biodex 950-146 Скачать руководство пользователя страница 22

Sprocket Axle Replacement

Tools Required:

Phillips Screwdriver, (2) Adjustable Wrenches, Tape Measure, Straight

Edge, 5/32" Allen Wrench.

1.

Remove power cord from wall.

2.

Remove the arm cranks (refer to Figure 4) so the covers can be removed. To do this,
remove the hex nut at the hub of each crank, drive the cotter pin through and discard.
Replacement part number for the cotter pin is #C08602. Do not re-use cotter pin.

3.

Remove both side covers.

4.

Remove chain take-up weldment secured with bolt and

½

" nut.

5. Loosen 5/32" Allen screw on the sprocket axle locking collar. Remove the locking

collar and washer, then remove the sprocket axle.

6. Install the new sprocket axle, washer and locking collar. Tighten the locking collar

until all axial play is removed. Tighten the 5/32" Allen screw.

7.

Refer to the Chain Replacement Procedure to tighten, align and check tensioning of chain.

8.

Install side covers and pedals.

SERVICE PROCEDURES

— 22 —

«
...
20
21
22
23
24
...
»

Содержание 950-146





































Отзывы:

Нет отзывов