Biocare PM-900, Руководство пользователя, Страница: 45 / 182

Chapter 5 User Interface
User Manual of Veterinary Monitor --33--
Chapter 5 User Interface
5.1 Interface Style Setup
The user can set up the interface style according to need, including waveform tracing methods, parameter color,
monitor parameter setup, screen setup, interface layout, etc.

Waveform Tracing Methods
Select [Main Menu] – [Maintenance] – [User Maintain>>] – password input – [Other Setup>>] – [Curve
Draw] to set up the tracing method for waveforms displayed on the screen. The tracing methods include
ladder and color steps. You may select the thickness of the line in this interface.

Screen Setup
Select [Main Menu] – [System] – [Screen Setup], or press the screen setup Shortcut key to enter the interface
[Screen Setup].
In this window [Screen Config], you can set interface type, screen brightness etc.
In the window [Std. Screen], you can set the content in the parameter and waveform regions. For more
detailed information about screen setup, please refer to the Interface Setup section in 3.7.
In the window [Big Numerics Screen], you can select the large font interface to highlight the needed
parameters and waveforms.

Parameter Color
Select [Main Menu] – [System] – [Screen Setup], or press the screen setup shortcut key to enter the interface
[Screen Setup]. In this window, select [Para. Color>>]. Then, select the color box on the right side of the
waveform and parameter, and select your needed color in the pop-up menu.

Shortcut Key
Select [Main Menu] – [System] – [Screen Setup], or press the screen setup shortcut key to enter the interface
[Screen Setup]. Select [Shortcut Key>>] in the current window, and you may then set up the three shortcut
keys displayed at the bottom of the screen according to need.