Biocare PM-900, Руководство пользователя, Страница: 28 / 182

Chapter 2 Overview
--16-- User Manual of Veterinary Monitor
2.4 Modules
This series of monitors support the following modules:
Standard parameter modules: ECG, Resp, SpO
2
, Temp and NIBP.
IBP modules (optional): the monitor supports two-channel IBP measurement.
CO
2
modules (optional): the monitor supports the products of Respironics and Kingst.
Measurement methods include primary flow (outlayed) and by flow (inlayed or outlayed).
2.5 Screen Display
2.5.1 Main Interface
This series of monitors use a colorful high-resolution TFT liquid crystal display screen, which can show the
animal‘s physical parameters and waveform information. Figure 2.5 shows its standard interface under a normal
monitoring condition.
Figure 2.5 The Main Interface
2.5.2 Interface Explanation

Animal’s Informational Region
The information region lies at the top of the screen, which shows the department, bed number, animal‘s name,
animal type and pacemaker status in that order.

Department: this can be set up in [User Maintain>>] - [Hospital Inf.>>]; without input, no information
will be shown at this site.

Bed number: it refers to the animal‘s hospital bed number, which can be set up at [Net Setup >>] in
[User Maintain>>].

Animal‘s name: it can be set up in [Animal Demographics]; without input, no information will be
shown at the site.

Animal type: it can be set up in [Animal Demographics]; without input, the animal will be defaulted
as > 20 kg.

Pacemaker status: it can be set up in [Animal Demographics]; if [Yes] is selected, the information will