Biocare PM-900 страница 133 Скачать руководство пользователя

Страница: 133 / 182

Chapter 13 Cleaning and Maintenance

User Manual of Veterinary Monitor --121--

Chapter 13 Cleaning and Maintenance

13.1 Cleaning of Monitor

The equipment should be regularly cleaned. Before cleaning, please consult and read the rules of the hospital on

equipment cleaning.

Below are the types of cleaners to choose:



Diluted soap water or diluted ammonia water.



Sodium hypochlorite (bleach powder for washing).



3% hydrogen peroxide.



70% ethanol or 70% isopropyl alcohol.

Before cleaning, please first shut off the power supply and, disconnect the power cord and remove the battery.

Gently wipe the equipment with a cotton ball or soft cloth soaked with appropriate cleanser. If needed, wipe off

the excessive cleanser with dry cloth. After cleaning, put the equipment in a cool and well-ventilated place for

natural drying.

Warning



Never wipe the monitor with abrasive materials.



Never immerse any part of the monitor in liquid or let any liquid leak into the casing.



Do not pour liquid onto the monitor or its accessories.



Do not leave any cleanser or disinfectant on the surface of any part of the monitor.

13.2 Disinfecting of Monitor

The disinfecting operation might cause some damage to the monitor. It is suggested that the disinfecting operation

be done only when required under the hospital‘s maintenance plan. The equipment should be clean before

disinfection.

Recommended disinfectant: 70% ethanol, 70% isopropyl alcohol or 2% glutaral solution.

Warning



Never disinfect the equipment with formaldehyde.



Never disinfect the sensor with high pressure.

Содержание PM-900























































































































































































Результаты поиска

Содержание PM-900

Отзывы:

Похожие инструкции для PM-900

Бренды по названию

Популярные бренды

Biocare PM-900, Руководство пользователя

Результаты поиска

Содержание PM-900

Отзывы:

Похожие инструкции для PM-900

Бренды по названию

Популярные бренды