Biocare PM-900 Скачать руководство пользователя страница 13

Страница: 13 / 182

Preface

User Manual of Veterinary Monitor

--1--

Preface

Thank you for using the veterinary monitor produced by our company.

In order to help you master the operation on this series of monitors as soon as possible, an user manual (the

current manual) has been attached to this series of products. It is strongly recommended you read it before you

install and use the product for the first time.

For performance and reliability improvements, some alternations will be made to the equipment (including the

hardware and software) by the manufacturer at times. On that occasion, although some information will be altered

or added, there is still a possibility of mismatch between the description in the manual and the product. Thank you

for understanding. For any error and omission in the manual, your notification is welcomed.

Manual Abstract

[Main composition and performance]

This series of monitors are mainly composed of a host processor and other corresponding functional accessories

(including electrocardiograph (ECG) lead cables, blood pressure cuffs and catheters, invasive pressure monitoring

sensors (optional modules), blood oxygen probes, body temperature probes, and EtCO

measurement components

(optional modules).

[Scope of application]

This series of monitors application is for monitoring animals‘ electrocardiogram, respiration, pulse rate, heart rate,

pulse oxygen saturation, body temperature, non-invasive blood pressure, invasive blood pressure (optional) and

EtCO

(optional) in a medical therapy unit.

[Cautions, warnings and suggestion]

This series of monitors do not have components for the customer‘s self-maintenance. When something is out

of order, please don‘t disassemble on your own.

This series of monitors do not belong to treatment facilities, and cannot be applied for household use.

The optional modules involved can be equipped according to the customers‘ need. The required equipment

has been preset by the manufacturer before this series of monitors come from the factory.

Don‘t allow contact to the animal, hospital bed or monitor during defibrillation.

Please turn off the power before cleaning this series of monitors.

Don‘t use this series of monitors under the condition of a high temperature, high humidity, high flammability,

high dust, or electromagnetic radiation.

Please keep the mains power source and grounding situations safe and stable.

(For other information, please refer to the manual.)

Содержание PM-900























































































































































































Результаты поиска

Содержание PM-900

Отзывы:

Biocare PM-900, Руководство пользователя, Страница: 13 / 182

Результаты поиска

Содержание PM-900

Отзывы: