12
4 Product Structure
4.1 External Structure
The product appearance is shown in the figure below.
Table 4-1 Automated sample processing system structure
No.
Name
Function
Notes
1
LCD screen
Show operation software interface.
2
Power switch Power supply for control instrument.
3
Sampling arm Used for pipetting.
4
Cap screwing arm Used to open the cap.
5
Sample carrier
For the placement of sample.
6
96 well PCR tubes
carrier
For the placement of PCR tubes.
7
Tips
carrier
For the placement tips.
8
Deep well plate
carrier
For the placement of deep well plate .
9
Reagent carrier
For the placement of reagent tube
placement.
10
Power port
Power supply for instrument.
Fuse
Used for safe circuit operation.
Φ5*20mm, quick disconnect
type, glass tube package
（
250V/3A
）
11
USB
For communication.
4.2 Internal Structure
The product internal structure is shown in the figure below.
