BIO RAD QX200, Инструкция по эксплуатации

Страница: 22 / 40

14 | QX200 Droplet Reader and QuantaSoft Software Instruction Manual QX200 Droplet Reader and QuantaSoft Software Instruction Manual | 15
Chapter 3 Using QuantaSoft Software
3.3 Analyze
In the Setup window, load a plate (filename.qlp), then click Analyze to open and analyze the data. The data
analysis interface is separated into three windows:
■ ■
Results table — summarizes results for wells selected in the well selector
■ ■
Well selector — enables selection of wells for targeted analysis
■ ■
Processed data/graphical display — allows visualization of graphical data from selected wells
Fig. 13. Interface during an active run.
Data for both detector channels are shown for the well being read.
Well data stream
Channel 1 histogram
(events vs. amplitude)
Run indicator
Analyzed wells
Switch data views
(charts to larger
window)
Experiment
Conc. channel 1 unknown
Conc. channel 2 unknown
Sample name
Channel 1 (FAM) fluorescence vs. event number Channel 2 (VIC or HEX) fluorescence vs. event number
Channel 2 histogram (events vs.
amplitude)