manualshive.com logo in svg

BIO RAD 145-1001, Инструкция по эксплуатации

Поделиться
Скачать
BIO RAD 145-1001 Скачать руководство пользователя страница 89

S3 Cell Sorter Instruction Manual

| 79

Shutdown

8

8.1 Daily Shutdown

The S3 system should be shut down at the end of the day. This will turn off all droplet 
formation and charging, lasers, and streams. A flush will be completed with the DI water 
container to rinse the system.  

IMPORTANT!

 Always follow the personal protective equipment (PPE) guidelines 

relevant to your laboratory’s safety procedures for dealing with ethanol or bleach.  

Note:

 At any time, the shutdown procedure can be canceled by clicking the X icon on the 

dialog windows.

Note:

 If a user chooses to log off from the software, the force cleaning procedure option can 

be run. Similar to the shutdown procedure, windows will appear with the exception of the 
automatic startup window.

To shut down:
1.  Ensure that the sample loading stage is in the wash position.
2.  On the Setup and Maintenance tab select 

Shutdown

. The software will confirm with a 

dialog box that you intend to shut down the system (Figure 88).

Fig. 88. System shutdown check.

Содержание 145-1001

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды