Bio Fireplace Group Foco 1000, Руководство по установке

Страница: 37 / 46

37
3.7 Foco Four
3.7.1 Built framework
Construct the main wall framework in your preferred material with the opening size shown in Table G
x = Insulation Board Thickness
1
Can vary depending on burner type. The dimensions shown are for a standard manual burner. Please check your
specific required burner cutout size, if your fireplace is equipped with another burner.
2
IMPORTANT - If you want the finished wall to go flush with the fireplace frame, you need to subtract the thickness
of the wall finishing materials from the dimensions of the framework. This will make the Foco frame protrude from the
framework equivalent to the thickness of the wall finishing materia. See 3.7.3 for more information.
NOTE: Remember to make room for heat-resistant insulation around the fireplace frame. Therefore the
thickness of the insulation boards should be added to all dimensions noted with x. Bord thickness is often
either 12.5mm or 15mm but can vary depending on the product you choose to use.
Table G - Framework opening size
Foco model
W
2 W1 min W2 max W3 max
D min 2
D1 max H H1 min
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
Foco Corner 800 800 600
1
80
1
80 400 110
1
400 + x 80
Foco Corner 1000 1000 800
1
80
1
80 400 110
1
400 + x 80
Foco Corner 1200 1200 1000 1 80 1 80 400 110 1 400 + x 80
D
W
W1
W2
W2
D1
H1
H
D1
! Height (H) is minimum
recommended clerance
above the burner.