4
Safety Precautions
!
Read all instructions.
!
To protect against risk of electrical shock, do not put the body (motor) in
water or any other liquid .
!
Close supervision is necessary when any appliance is used by children.
!
Unplug from electrical outlet when not in use and before disassembly
for cleaning.
!
Avoid contact with moving parts.
!
Do not let cord hang over edge of counter.
!
Keep hands and utensils out of the jug container. A rubber scraper or
spatula may be used but only when the blender is not running.
!
Always operate with the lid firmly in place.
!
If in the event the motor overheats, the temperature monitoring system
will trigger and the motor will stop. Switch off and unplug the appliance
and let the motor cool down. The motor temperature monitoring system
resets after the blender is unplugged from wall socket for 45 minutes.
!
Blades are sharp. Use caution when handling the blade. Do not attempt
to disassemble blade and blade assembly.
!
To prevent overheating, never allow the blender to run for more than two
minutes at a time, as it can cause permanent damage to the motor.
EN
