BINZEL-ABICOR 881.3112, Руководство по эксплуатации

Страница: 40 / 108

EN - 14
6 Putting into operation M-Drive
8 Set the contract pressure by turning the pressure lever (1) .
9 Close the cover.
6.10 Pin assignment
1 Motor control lead jack X41 2 Control lead jack X46 3 Digital wire actual value encoder X59
Fig. 10 Overview of the pin assignment
1 2
3
Pin Description Signals X41 pin
1 Speed sensor Gnd a1
2 Speed sensor Vcc a2
3 Speed sensor Stby a3
4 Speed sensor Ch A a4
5 Speed sensor Ch B a5
6 Trigger 24 V b1
7 Trigger Switched back b2
8 Gas trigger GND gas valve incoming b3
9 Gas trigger GND gas valve closed back b4
10 CAT Normally open switch b5
11 CAT COM c1
12 CAT Normally closed switch c2
13 Motor Motor + c3
14 Motor Motor - c4
15 n.c.
16 n.c.
Tab. 8 Motor control lead