BINZEL-ABICOR 881.3112, Руководство по эксплуатации

Страница: 37 / 108

M-Drive 6 Putting into operation
EN - 11
6.5 MF1, Masterliner & M-Drive
Establish the connections as shown in the following diagram:
6.6 Establishing the media connections at the M-Drive
Interconnect the following connections:
1 MF1 drive unit 2 Masterliner 3 M-Drive 4 Control lead for motor/wire actual value
encoder
Fig. 5 M-Drive Masterliner & masterfeeder
1 2 3
4
1 Air-blast outlet
2 Air-blast inlet
3 Gas inlet
4 Welding cable connection
5 Coolant return inlet
6 Coolant supply inlet
7 Coolant supply outlet
8 Coolant return outlet
9 Cable assembly
Fig. 6 Connection diagram for M-Drive
central connection – cable assembly
1 2
3
5 6 7 8
9
4
1 Masterliner connector
2 Coolant return inlet
3 Coolant supply inlet 4 Coolant supply outlet 5 Coolant return outlet
Fig. 7 Connection diagram for M-Drive
quick coupling – Masterliner
1
5
3 2 4