BINZEL-ABICOR 881.3112, Руководство по эксплуатации

Страница: 36 / 108

EN - 10
6 Putting into operation M-Drive
6.2 Establishing connections
6.3 M-Drive & e BOX
Establish the connections as shown in the following diagram:
6.4 MF1, cable assembly & M-Drive
Establish the connections as shown in the following diagram:
1 Port for control lead X46 2 Port for control lead X11 3 e BOX 4 Control lead 5 M-Drive
Fig. 3 M-Drive & e BOX
1
4
2
5
3
1 MF1 drive unit
2 Motor control lead
3 VTS cable assembly
4 Motor control lead
5 Air-blast hose
6 Coolant supply hose (blue)
7 M-Drive
8 Coolant return hose (red)
9 Control lead for wire actual
value encoder
10 Wire inlet tube
11 Control lead for wire
actual value encoder
Fig. 4 Standard & masterfeeder M-Drive
11
4 5 1 2 7
10
3
9
6
8
NOTICE
• Ensure that the coolant supply and return hoses have been correctly installed.
Coolant supply = blue, coolant return = red
• We recommend using BTC-50 coolant; suitable for use at up to 50°C.
• To ensure the maximum cooling capacity, check the condition of the coolant regularly.