Field
Description
•
3%
: OSPF is activated for this interface, i.e. routes are
propagated or OSPF protocol packets sent over this interface.
•
%
: OSPF is disabled for this interface.
Proxy ARP Mode
Select whether and how ARP requests from your own LAN are
to be responded to for the specified connection partner.
Possible values:
•
%
(default value): Deactivates Proxy ARP for this
connection partner.
•
.+ 5
: Your device only responds to an ARP re-
quest if the status of the connection to the connection partner
is
.+
or
5
. In the case of
5
, your device only
responds to the ARP request; the connection is not set up un-
til someone actually wants to use the route.
•
.+ 1(
: Your device responds to an ARP request only if the
status of the connection to the connection partner is
.+
, i.e. a
connection already exists to the connection partner.
DNS Negotiation
Select whether your device receives IP addresses for Primary
DNS Server and Secondary DNS Server and WINS Server
Primary and Secondary from the connection partner or sends
these to the connection partner.
The function is enabled with
"1
.
The function is enabled by default.
14.1.5 UMTS/LTE
Note
Please note that the UMTS/LTE menu is only available for devices with an integrated
UMTS/HSDPA modem, or with devices supporting the use of a UMTS/HSDPA/LTE
USB stick!
A list of all configured GPRS/UMTS/LTE connections is displayed in the WAN->In
Dialup->UMTS/LTE menu.
With mobile standards GPRS, UMTS and LTE, you can establish an internet connection via
bintec elmeg GmbH
14 WAN
bintec RS Series
295
