Field
Description
Server IP Address
Enter the IP address of the server that is to be re-
quested for login authentication.
Secret
Enter the password to be used to authenticate and, if applic-
able, encrypt data exchange between the server and
the network access server (your device). The maximum length
of the entry is 32 characters.
Priority
Assign a priority to the current server. The server
with the lowest value is the one used first for login
authentication. If this does not respond or access is denied
(only if Policy =
Non-authoritative
), the entry with the
next-highest priority is used.
The available values are
0
to
9
, the default value is
0
.
Entry active
Select whether this server is to be used for login authentication.
The function is activated by choosing
Enabled
.
The function is enabled by default.
The Advanced Settingsmenu consists of the following fields:
Fields in the Advanced Settings menu
Field
Description
Policy
Select the interpretation of the response.
Possible values:
•
Non-authoritative
(default value): The serv-
ers are queried in order of their priority (see Priority) until a
positive response is received or a negative response is re-
ceived from an authoritative server.
•
Authoritative
: A negative response to a request is ac-
cepted, i.e. a request is not sent to another server.
The device's internal user administration is is not turned off by
. It is checked after all servers have been
queried.
TCP Port
Shows the default TCP port (
49
) used for the pro-
tocol. The value cannot be changed.
Timeout
Enter time in seconds for which the NAS is to wait for a re-
5 System Management
Funkwerk Enterprise Communications GmbH
112
bintec R200 Series
