Chapter 2 bintec H2 Aut
2.1 Introduction
This manual explains how to install and connect the bintec H2 Aut router.
Fig. 1:
bintec H2 Aut
2.1.1 Power supply
For further information on the bintec H2 Aut power supply, please see
on page 9.
2.1.2 Hardware monitoring
The LEDs on the front panel are used to monitor the hardware in the bintec H2 Aut. These LEDs provide
visual status information on the hardware components, indicating whether there is connectivity, data flow, etc.
For further information on said panel, please see
on page 5.
bintec elmeg GmbH
2 bintec H2 Aut
bintec H2 Aut
3
