Field
Description
The function is enabled with
7+
.
The function is disabled by default.
Local IP Address
Only for IP Address Assignment =
*
or
= %1
.
Enter the WAN IP address of your IPSec tunnel. This can be the
same IP address as the address configured on your router as
the LAN IP address.
Metric
Only for IP Address Assignment =
*
or
= %1
. %+
and Default Route =
7+
Select the priority of the route.
The lower the value, the higher the priority of the route.
Value range from
to
. The default value is
.
Route Entries
Only for IP Address Assignment =
*
or
= %1
. %+
Define routing entries for this connection partner.
•
? ,
: IP address of the destination host or
LAN.
•
9B
: Netmask for
? ,
.
•
.*
: The lower the value, the higher the priority of the
route (possible values
). The default value is
.
Fields in the menu Additional IPv4 Traffic Filter
Field
Description
Additional IPv4 Traffic
Filter
Only for Internet Key Exchange =
=
Use Add to create a new filter.
Fields in the IPv6 Interface Routes menu
Field
Description
Security Policy
Select the security settings to be used with the interface..
Possible values:
bintec elmeg GmbH
14 VPN
be.IP 4isdn
241