Field
Description
Enter the idle time in seconds for static short hold. The static
short hold setting determines how many seconds should pass
between sending the last traffic data packet and clearing the
connection.
Possible values are
to
(seconds).
deactivates the
short hold.
The default value is
.
Example:
for FTP transmission,
for LAN-to-LAN trans-
mission,
for Internet connections.
Fields in the IPv4 Settings menu.
Field
Description
Security Policy
Select the security settings to be used with the interface.
Possible values:
•
)3
: All IP packets are allowed through except for
those which are explicitly prohibited..
•
/3
(default value): Only those packets are transmit-
ted that can be attributed to a connection that has been initi-
ated from a trusted zone.
You can configure exceptions for the selected setting in the
on page 277 menu.
IP Address Mode
Choose whether your device has a static IP address or is as-
signed one dynamically.
Possible values:
•
,
(default value): Your device is dynamic-
ally assigned an IP address.
•
*
: You enter a static IP address.
Default Route
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
7+
.
The function is enabled by default.
bintec elmeg GmbH
13 WAN
be.IP 4isdn
215
