background image

Binks’ 95SL spray gun is the latest
innovation in the 95 model line
of spray guns. The 95SL is slim
and streamlined, and weighs less
than other models. These features
make this product the gun of
choice for smaller grips and
lighter handling.

The 95SL is a high production
gun with stainless steel fluid
passages and can be used with
most coatings. The gun body is
drop-forged anodized aluminum.
Fluid passages are of stainless
steel. The 95SL features:

• an adjustable, floating needle

valve

• a stainless steel or tungsten 

carbide fluid nozzle

• a self-centering air nozzle

• a brass air-valve cartridge

• light weight (about 1 lb., 4 oz.)

This Part Sheet contains an
exploded drawing and a detailed
parts list to enable a complete
understanding of the gun’s con-
struction. A summary of gun
operation, cleaning, care and
maintenance, and troubleshooting
common problems is also 
provided.

1

3

2

4

5

ILLUSTRATION KEY

1. Air Nozzle Assembly
2. Gun Body
3. Side Port Control
4. Fluid Control Knob
5. Air Connection 1/4"NPS(m)

Replaces 

Part Sheet 

2731R-1

Part 

Sheet

2731R-2

PACKAGE CONTENTS

Please note your Binks 95SL gun package was shipped with 
the following contents.

DESCRIPTION

PART NO.

QTY.

95SL Spray Gun ..............................

1

Part Sheet ......................................

2731

1

Gun Brush ......................................

82-469

1

Gunner’s Mate ................................

54-3871

1

Cleaning Brush ..............................

OMX-88

1

NOTE

Please be sure to read the
warning regarding air pressure
and the warning regarding
paints, solvents, and other
coatings on page 2.

Binks Model 95SL

SPRAY GUN

95 SLV Gun Assembly (obsolete)

VT set-ups are available as options.

Содержание 95SL









Отзывы: