TWG 01 01/2011
page 27/39
6.6
Call confirmation
6.6.1 Setting the confirmation code
This function is available only with touchtone telephones.
As soon as the message has been transmitted to a phone number, the recipient can confirm the call by
dialing a code number. Thus this phone number will not be dialed any longer.
The code may have up to two digits. Factory setting: “1”.
Setting the confirmation code:
Step Key
Effect
Yellow
LED
1.
Program call
1x flashing
2.
Program selection: “Entry of confirmation
code”
1x flashing
3.
Selection of program step confirmed
2x flashing
4.
Entry of
confirmation
code
Information entry: confirmation code
1x flashing
following each hit
5.
Programming terminated.
lights up for 1.5 sec
6.6.2 Defining the number of received confirmation codes
After receiving a defined number of confirmation codes, the TWG 01 stops further alarming. You can
define the number of received confirmation codes that is required. This number can be valid in general or
be a different one for each individual call group.
Entry of the number of confirmation codes for all call groups:
Step Key
Effect
Yellow
LED
1.
Program call
1x flashing
2.
Program selection: “number of
confirmation code”
1x flashing
3.
Entry is valid for all call groups
1x flashing
4.
Selection of program step confirmed
2x flashing
5.
e.g.
Entry of the number of confirmation codes
(1 up to 6)
1x flashing
6.
Programming terminated.
lights up for 1.5 sec