Redline Operating Manual RE / RF / RI 12/2010
page 32/46
Cancelling timer operation:
Press both arrow keys simultaneously for at least 1 second.
Main menu
(Timer operation)
Main menu
(Standby)
1 sec.
TIMER RUNNING
If you to set the timer duration “DWELL” in the setting menu for the timer duration to zero during timer
operation, this will also terminate timer operation.
Timer expired:
After the expiry of the timer run time, the controller changes to operating mode “Standby”.
The heating is off, i.e. the chamber will cool down. The scrolling message “TIMER END” remains until
there is a new entry.
Main menu
(Standby)
TIMER END
6.5
Setting the temperature unit
In the main menu (Standby or Automatic Mode or Manual Mode) press the functional button 4 times, until
the setting menu for the temperature unit “UNITS” appears. Select the desired unit °C or °F with the
arrow keys.
Main menu
(e.g. Standby)
Setting menu for
temperature unit
Setting menu for
temperature unit
4 x
DISPLAY UNITS
DISPLAY UNITS
Other selections in this menu are non-functional.
Back to the main menu display: press the functional button or wait for 1 minute.
