Binder APT.line KBF-LQC Series, Руководство по эксплуатации

Страница: 48 / 107

KBF-LQC (E5.2) 12/2010 page 48/106
10.2 Entry of temperature values and fan speed
08:43:57 15.12.09
Pr og. Select.
Pr og 1 PROG 01
Pr og 2 PROG 02
Pr og 3 PROG 03
Pr og 4 PROG 04
Pr og 5 PROG 05
Pr og 6 PROG 06
Pr og 7 PROG 07
Pr og 8 PROG 08
Pr og 9 PROG 09
Pr og 10 PROG 10
Pr og 11 PROG 11
Prog 1 PROG 01
TP- Program 2
TP- Program 3
TP- Program 1
Select the first subroutine “
TP-Program 1
” and confirm with ENTER.
An initially empty
program table
appears. You can now enter the temperature program.
Program No. Subprogram TP-Program No. 1 Temperature at the
beginning of the
program section
Fan speed in %
Factory setting:
50% in Idle Mode
100% in Manual Mode and
Program Mode
Operation lines
(no function)
Duration of program
section Number of start section in case
of repeat cycles
Total number of program
sections
Parameter set (preselected)
Tolerance band limits tem-
perature (maximum and mini-
mum temperature)
Number of repeats in case of
repeat cycles
You can enter
Program sections
into this program table.
Hit the PGM button. An inquiry display appears offering to enter or delete individual program sections.
ZP-Abschnitt Abs. Nr. 5
insert
delete
In this view, new program lines can be entered or deleted:
new New lines are added below in the table
insert New lines are added above a previously selected line
delete Individual lines that have been selected previously are deleted
Create as many lines, i.e. program sections, as desired. In a next step, values can be entered into these
lines. It is as well possible to add supplementary lines later on or to delete individual lines at any moment.
08:43:55 15.12.09