Binder 9020-0366, Руководство по эксплуатации

Страница: 44 / 95

KBF-S / KBF-S-UL (E6) 11/2021 page 44/95
Setting the time: minutes
The current setting flashes. Enter the current minutes with the
arrow
buttons .
Confirm the entry with the OK button .
Time
With the
Back button
you can go back to the “ Chamber ” submenu and, repeatedly pressing it, to Normal
display
.
11.5 Function “Language selection at restart”
If the function “Language selection at restart” is activated, menu language, date, time, and temperature unit
are checked with every startup of the chamber. At this occasion it is also possible to modify them with
“User” access level.
Required access level: “Admin”.
Path:
Normal display Settings Chamber Language selection at restart
Press the OK button to enable the setting.
Function “Language selection at restart”
The current setting flashes. Use the
arrow buttons to select between
ON and OFF.
Confirm the setting with the
OK button
.
Language sel. at restar
With the arrow-down button you can now change to the next parameter (chamber address).
With the
Back button
you can go back to the “ Chamber ” submenu and, repeatedly pressing it, to Normal
display
.
11.6 Setting the chamber address
This setting is required for the communication with the BINDER APT-COM™ 4 Multi Management Software.
The chamber address settings in the chamber controller and in the software must be identical.
Required access level: “Admin”.
Path:
Normal display Settings Chamber Chamber address
Press the
OK button
to enable the setting.
Setting the chamber address
The current setting flashes. Enter the desired address with the
arrow
buttons . Setting range: 1 up to 254
Confirm the entry with the OK button .
Chamber address
With the arrow-down button you can now change to the next parameter (display brightness).
With the Back button you can go back to the “ Chamber ” submenu and, repeatedly pressing it, to Normal
display .