OWNER’S MANUAL
>>
Extender For HDM
I™
Cables
IMPORTANT SAFETY INSTRUCTIONS
SET UP GUIDE FOR MODELS:
HD-1CAT-1080P-130
HD-1CAT-1080P-50
HD-2CAT-1080P-130
SPECIFICATIONS
FREQUENTLY ASKED QUESTIONS
WARRANTY INFORMATION
CAT-5
HDCP COMPLIANT
TRANSMITTER
HD-1CAT-1080P-130 HD-1CAT-1080P-50 HD-2CAT-1080P-130
CONGRATULATIONS!
ON SELECTING THIS BINARY™ BRAND PRODUCT
This product is designed to provide years of exceptional reliability. Binary™ is one of the most highly regarded
brands available today. We appreciate your business and we stand committed to providing our customers with
the highest degree of quality and service in the industry.
TECHNICAL SPECIFICATIONS
HD-1CAT-1080P-130 HD-1CAT-1080P-50
HD-2CAT-1080P-130
Audio Output
Stereo or 7.1 Channel Surround
Up to 7.1 Channel Surround
HDMI™ Support
HDMI™ 1.2
HDMI™ 1.3A
Video Bandwidth
4.95 GBPS
6.75 GBPS
Input
Output
1080i
S
1080p
Cat 5 50M (164 ft)
40M (130 ft)
Cat 6 60M (197 ft)
50M (164 ft)
1080i
S
1080p
Cat 5 25M (82 ft)
15M (50 ft)
Cat 6 30M (98 ft)
20M (65 ft)
1080i
S
1080p
Cat 5 55M (180 ft)
40M (130 ft)
Cat 6 60M (197 ft)
50M (164 ft)
Transmitter
Receiver
(1) HDMI™
(1) RJ-45
Transmitter
Receiver
(1) RJ-45
(1) HDMI™
Transmitter
Receiver
(2) RJ-45
(1) HDMI™
Transmitter
Receiver
(1) HDMI™
(2) RJ-45
TECHNICAL SPECIFICATIONS
HD-1CAT-1080P-130
HD-1CAT-1080P-50
HD-2CAT-1080P-130
Housing
Metal
Metal (TX), Plastic (RX)
Metal
Product Weight
0.77 lbs.
0.43 lbs.
0.70 lbs.
Dimensions
Transmitter & Receiver:
85mm
(3.3”) x 92mm (3.6”) x 24mm (.94”)
Transmitter:
85mm (3.3”) x 92mm
(3.6”) x 24mm (.94”)
Mini Receiver:
35mm (1.4”) x
24mm (0.9”) x 22mm (0.9”)
Transmitter & Receiver:
85mm
(3.3”) x 92mm (3.6”) x 24mm (.94”)
Transmission Length
HDCP Compliant
YES
8 Level Digital Equalization
YES
Power Supply
5V 4A DC
Input TMDS Signal
1.2 Volts (Peak to Peak)
Input DDC Signal
5 Volts (Peak to Peak)
Power Consumption
2 Watts (Max)
HDMI™ Connector
19 Pin Female
RJ-45 Connector
2 Indication LEDs
Video Output
480i / 480p / 720p / 1080i / 1080p
Binary Cables
10405 Granite Street
Charlotte, NC 28273
Tech Support:
1-866-838-5052
©2009 Binary Cables • Charlotte, NC
3-Year Limited Warranty
This Binary™ Product has a 3-Year Limited Warranty. This warranty includes parts and
labor repairs on all components found to be defective in material or workmanship under
normal conditions of use. This warranty shall not apply to products which have been
abused, modified or disassembled. Products to be repaired under this warranty must be
returned to Binary Cables or a designated service center with prior notification and an
assignment return authorization number (RA).
Frequently Asked Questions:
1. How does equalizer (EQ) work?
Equalizer is a built-in electronic device used to fine-tune picture quality. Please turn rotary controller
counterclockwise from 7 to 0 to get the optimal vision. If you find the display is not showing properly, please check your cable connection
and then confirm you are within the maximum transmission limit.
2. What kind of LAN cable is recommended?
The transmission length is largely influenced by the type of LAN cables, the type of A/V
sources, and the type of A/V display. The testing result shows solid LAN cables (usually in 300m/1000ft form) can transmit HDMI™
signals a lot longer than stranded LAN cables (usually in patch cord form). Shielded STP cables perform better than unshielded UTP
cables. A solid UTP CAT 5e cable shows longer transmission length than stranded STP CAT 6 cable. For long extension users, solid
cables are the only choice.
3. I want HDMI™ extension length over stated specification, is that possible?
Yes. To extend HDMI™ signals above stated
specification, please use high quality HDMI™ cable (24 gauges) and CAT 6 solid STP cable. If longer extension is required, please set
HDMI™ source at lower resolutions.
4. I am using HD-1CAT-1080P-50 to receive HDMI™ signal, but there is no image on display.
HD-1CAT-1080P-50 is only intended to
use for shorter extension length without extra power. The maximum extension length is at 15m under 1080p, or 25m under 720p, or 1080i
resolution. If required application exceeds this extension limit, please use HD-1CAT-1080p-130.
5. There is no image and/or audio on HD display, what could be the problem?
First, please check all cables are properly installed.
Second, please check A/V source is functioning correctly. Third, please adjust EQ and turn mode to stereo audio.
6. It is still not working.
If the problem persists, please follow the EDID learning instruction stated below to learn specific EDID information
from your HD display. Then, repeat the sequences stated in previous question.
EDID Learning Instructions, ONLY FOR: HD-1CAT-1080P-130 and HD-1CAT-1080P-50
1. Turn on the transmitting end of the unit.
2. Turn the mode counterclockwise from number 0 (for 5.1 channel and 7.1 channel) or number 1 (for stereo) until you reach number 7.
3. Use an HDMI™ cable to connect the unit to the display (not the video source). The LED on the RJ-45 will dim and light again, which
indicates the EDID learning is finished.
4. Turn the mode clockwise from number 7 to number 0 (for 5.1 channel and 7.1 channel) or number 1 (for stereo). The most important
thing is not to turn the rotary arrow past 6, which will erase the EDID just learned and restore the factory default EDID.
5. Reconnect the unit as defined in the Installation Instructions.
SPECIFICATIONS
™
Rev 090624
