B-210-HDMATRIX-4X4
OWNER’S MANUAL
Binary™ HDMI 4X4 Matrix
Switch, HDMI Version 1.3
>>
Welcome to the Binary™ brand of products
The B-210-HDMARTIX-4x4 is a 4-by-4 HDMI true matrix switcher. It allows any HDMI source to be
shown on the any of the four outputs simultaneously.
You may also use the B-210-HDMATRIX-RECVR to extend the HDMI signal to the display over 2 CAT5/6
cables. The B-210-HDMATRIX-RECVR has the ability to receive HDMI signal and transmit IR from the
TV location back to the Matrix. Equalization and amplification settings also ensure HDMI signals’
transmission through long cable without quality loss.
The four CAT5/6 extender outputs are in parallel to the four HDMI port outputs and can be used
simultaneously if needed.
SPECIFICATIONS
Operating Temperature Range
-5 to +35°C (-41 to +95 °F)
Operating Humidity Range
5 to 90 % RH (no condensation)
Input Video Signal
0.5-1.0 volts p-p
Input DDC Signal
5 volts p-p (TTL)
Signaling Rate
2.25 Gbit/s
Video Format Supported
1080p(24/60) / 1080i/ 720p /576p /480p /576i /480i
Max Deep Color
12bit
Audio Format Supported
Up to DTS-HD, Dolby trueHD
Output Video
HDMI 1.3
Maximum Transmission
Distance
< 50 feet
CAT5/6 Transmission Distance
1080p can be extended to CAT5e 130 feet
or CAT6 160 feet.
Lip Sync
YES
Switching Time
Under 5 second (source/ TV dependant)
CEC
YES
Power Consumption
12 watts (Max)
Dimensions
14.4 in x 4.4 in x 1.8 in
Weight
4.1 lbs
*Note: Specifications are subject to change without notice. Dimensions and weight are approximate.
