BimmerTech BMW F10 Carplay MMI Prime, Инструкция по установке и эксплуатации

Страница: 29 / 41

Installation Instructions - BMW F10 CarPlay MMI Prime
Installing the Rear View Camera (RVC)
Attached are instructions how to take apart the trunk lid. You have to replace the factory trunk handle
with a new handle that includes the camera (in the process move the switch mounted on a bit of
plastic from your original trunk handle to the new one) and then run the camera cable all the way to
the dashboard under various trim pieces, through the rear seats and under the door sills.
A coat hanger feeder wire will come in handy during this part of the installation. Then connect the
yellow RCA cable from the rear camera extension cable to the yellow RCA socket marked (REAR) in
the PnP harness and also connect the rear camera power connector to the appropriate power socket
with yellow and black wires on the PnP harness. There are two of them to choose from.
BimmerTech FZE | Phone: +1(646) 439-7920 | www.bimmer-tech.net 29