BimmerTech BMW F10 Carplay MMI Prime, Инструкция по установке и эксплуатации

Страница: 16 / 41

Installation Instructions - BMW F10 CarPlay MMI Prime
Initial pairing
To establish a wired CarPlay connection with the MMI connect an original Apple cable between the
iPhone's Lightning port and the USB socket on the MMI’s harness. Non-original cables are not
recommended - oftentimes they do not work at all, so make sure to use an Apple certified cable.
Once the cable is connected you’ll need to confirm a few requests on your iPhone and you’ll be set.
When the connection has been established please try playing music from your iPhone via CarPlay
mode to verify whether you have your AUX port input selected and set up correctly. If you can hear the
music at a comparable volume to FM radio that means you’re set up fine. If the volume is too low you
can increase the AUX ports input volume. In general level 0 should be fine - it simply means there is no
additional volume boost on the AUX input.
If you find it to be necessary you can also adjust the 8-band Equalizer in the MMI Audio menu.
After making sure audio playback works fine you can check the microphone reception when in
CarPlay mode. Press and hold the Voice Command button on your steering wheel until you hear a
chime and see the Siri screen on your BMW’s screen. State your command of choice to check whether
Siri is hearing your voice as indicated by the waveform moving at the bottom of the screen and if an
answer is provided through your speakers, then you’re set.
Wireless iPhone Pairing
It’s also possible to pair an iPhone wirelessly; however, we still recommend doing the initial set up via
cable, as it’s a way to ensure a reliable connection.
First, make sure you have Siri enabled in your phone to allow CarPlay operation. If Siri is toggled off
CarPlay will not be accessible.
You will need to reboot your phone next.
To pair wirelessly go to Settings -> Wireless Devices -> Wireless CarPlay Pairing.
BimmerTech FZE | Phone: +1(646) 439-7920 | www.bimmer-tech.net 16