BIMG Metvisa FTG.150B, Инструкция по эксплуатации

Страница: 28 / 44

28
Equipment presents
noises
Wiring touching the motor fan.
Send the equipment to the nearest authorized
service station or contact the factory. Unbalanced fan propellers.
Steam pipe leaning against
fan protection grid.
Equipment with smell of
burning or smoke.
Voltage different from mains
voltage.
Send the equipment to the nearest authorized
service station or contact the factory.
Miscellaneous electrical problems.
Burned food Very high temperature and or baking time.
Failure to cure the paint inside
the oven.
For the first use of the equipment it is necessary to
cure the paint inside the oven (chamber). Follow the
instructions in item 4.3 (Operating Procedures).
Time to warm up or
return to temperature.
Incorrect adjustments to the controller.
Make the controller adjustments as instructed in item
4.3 (Operating Procedures).
Dirty oven.
Clean the oven according to the instructions in item
5.1 (Cleaning Procedures).
Overloading.
Charge the oven, respecting the spaces available on
the racks.
Lack of gas or fault.
Evaluate whether there is gas in the cylinder,
whether the gas cylinder register is open, whether
the gas hose is connected and whether the gas
regulator is open.
Miscellaneous electrical problems.
Send the equipment to the nearest authorized
service station or contact the factory.
Uniform baking
Temperature too high, or too low. Make adjustments to the controller according to the
instruction manual.
Fan out of position.
Send the equipment to the nearest authorized
service station or contact the factory.
Overloading.
Send the equipment to the nearest authorized
service station or contact the factory.
Oven giving shock
Lack of grounding. Follow the instructions in item 3.3 (Electrical Connection).
Miscellaneous electrical
problems (motor / capacitor,
contactor, wiring, fuse, electric
switch, power cable, buttons
and burned resistance).
Send the equipment to the nearest authorized
service station or contact the factory.
For more information and clarification, contact your nearest Authorized Service Center. See
technical assistance on our website: www.metvisa.com.br
7. Appliance Life and Components
The life of the equipment can vary from 3 to 5 years depending on the proper use, cleaning,
maintenance and quality of its components.
The following is the useful life relationship of the major components:
•
On / Off button: 10000 maneuvers;
•
Power button Light: 10000 maneuvers;
•
Cables and wires: 25 years;
•
Electrical terminals: 8 years.