Part No 441247
Form No F111113A
8
FORCE 601V
BLOWER Owner’s Manual
TROUBLESHOOTING
Problem
Possible Cause
Solution
Abnormal vibration.
· Loose or out of balance impeller.
· Check impeller and replace if required.
· Debris in impeller.
· Clear debris with compressed air or a
backpack blower (see below pictures).*
· Loose engine.
· Check engine.
Engine will not start.
· Engine not in full choke position.
· Check choke position.
· Out of gasoline or bad, old gasoline.
· Check gasoline.
· Spark Plug wire disconnected.
· Connect spark plug wire.
· Gas valve off.
· Turn on gas valve.
· Dirty air cleaner.
· Clean or replace air cleaner. Contact a
qualified service person.
Engine is locked, will not pull
over.
· Engine problem.
· Contact an engine servicing dealer for
engine problems.
Aim-N-Shoot
TM
lever sticking
· Debris stuck around cone
· Clean debis
· Cone adjustment knob too tight
· Apply silicone based lubricant to
· Adaptor mount nut (item 43) too
pivot points
tight
· Loosen manual adjustment knob
· Loosen nut
*Using compressed air, or a Backpack blower, you
can loosen or free debris easily from the impeller and
housing, which can cause wear and tear on the
machine. You can manually remove debris by taking
off the front housing. Note: Always disconnect the
sparkplug when servicing.
