Billion BiPAC 4700AZ, Руководство пользователя

Страница: 53 / 189

49
Internet

4G/LTE
Status: Choose Activated to enable the 3G/4G-LTE connection.
Usage Allowance: to control 4G/LTE flow, click it to further configure about 4G/LTE flow control, refer
to the following Usage Allowance for more information.
LTE PCI Lock: Choose whether to lock to a specified PCI(Physical Cell Identifier). Users must know
the target PCI or else ignore this setting. See LTE PCI Lock for more information.
IP Pass-Through Mode: When enabled , the device will gain a WAN IP via 4G/LTE dial-up and pass
on to the PC connected to device, thus your PC gets a public WAN IP working on the internet. Note:
under this circumstance, often only one PC is connected to the device.
Network Mode: There are some options of service standards: Automatic , UMTS 3G only , GSM 2G
Only , LTE Only . If you are not sure which mode to use, you may select Automatic to auto detect the
best mode for you.
PLMN Selection: Enter or press Scan button to detect a cloest base station(mobile service provider)
from where you are. See PLMN Selection for more information.
TEL No.: The dial string to make a GPRS / 3G/4G-LTE user internetworking call. It may provide by
your mobile service provider.
Dual APN: The Router can support up to two APNs. Select Single or Dual.
APN: An APN is similar to a URL on the WWW, it is what the unit makes a GPRS / UMTS call. The
service provider is able to attach anything to an APN to create a data connection, requirements for