Bill Hempel 42% Extra 260, Руководство пользователя

Страница: 5 / 31

5
shipping damage. You must contact the carrier. We will work with
the purchaser and the freight company to resolve any issues.
However a claim must be filed before we can begin the process.
Re-shrink the Covering:
Before doing any assembly or installation it is very important to re-
shrink or re-tighten the already applied covering. Due to the
shipping process, heat and humidity changes from different
climates, the covering may become lose and wrinkle in the sun. If
you take the time to re-tighten the covering, you will be rewarded
with a long lasting beautifully covered model. Using your
covering iron with a soft sock, gently apply pressure and rub in the
covering. If any bubbles occur, your iron may be to hot. Reduce
heat and work slowly. You should be able to just see the wood
grain under the covering when proper adhesion has occurred.
IMPORTANT:
Go over any and all seams and color overlaps with your iron to
assure good adhesion of the covering to the wood. This is
especially important at the Leading edges of the wings and
stabs and all overlapping material.
Once all seems have been ironed down, then use a heat gun
with extreme caution. Be careful; don’t apply too much heat to
one area for long periods of time. This may cause the trim
colors to over shrink and pull away leaving unsightly gaps on
the color lines. The trim stripes are especially vulnerable to