Bilancial D410, Руководство по эксплуатации и обслуживанию, Страница: 50 / 84

5.2.17 Totals management
The terminal provides functions for totalling the weighing data
associated with the various codes. The totalization operation consists of
adding the current weight value to the sum of the previous weights and
increasing by one the number of weighing operations. To access the list
of available totals, follow the pathway:
...>MENU>Totals management
(Shortcut key
TOTALS
)
General totals
These totalization functions provide general totals for the gross
weight (if enabled during installation), net, tare and number of
weighing operations independently of any associated codes. The data
can be obtained using the following functions:
...>MENU>Totals management>General total
(Shortcut key
GENTOT
)
...>MENU>Totals management>Partial total
(Shortcut key
PARTOT
)
✔
PRINT
prints selected value
✔
RESET
resets the total
✔
D410
1-50