Bilancial D410, Руководство по эксплуатации и обслуживанию, Страница: 47 / 84

5.2.11 Product code
The terminal provides functions for the management of product codes,
each of which may be associated with an alphanumeric description that
can be printed and/or transmitted along with the weight. The product
code is a numeric code with a maximum of 6 digits, while the
alphanumeric description may be up to 20 characters long. The
maximum of codes that can be entered is defined in the installation
phase. It is variable and depends on which other data need to be
managed.
To enter a product code, follow the pathway:
...>MENU>Data management>Code management>Product code
(Shortcut key
PROCOD
).
Enter the product code and the alphanumeric description as described
respectively in par. 5.1.2 on page 1-38 and par. 5.1.3 on page 1-38 .
If the product code is set to 0 (zero) during weighing operations, it will be
excluded from all totalization operations.
5.2.12 Product code list
By following the pathway:
...>MENU>Data management>Code management>Product code
list
you can call up a product code and display the relative description. To
call up a product code, press the key in correspondence with the
indication
PROCOD
, enter the numeric code and press to confirm.
If a printer is connected, by pressing the key in correspondence with the
indication
SUMMAR
, you can print the data relative to a single product
code or summary of all the product codes within the range specified by
the operator.
D410
1-47