Bilanciai VENUS, Руководство пользователя

Страница: 175 / 184

6. USE OF THE TERMINAL - PROCESS
6.1 Data modification
See par. 5.2.4 on page 1-43.
6.2 Basic reversal
The reversal operation can be carried out during the process where
necessary.
Press Pcs reversal and digitize a quantity in kg between the suggested
limits. Confirm ( ). The belts will stop (if applicable - automatic
versions) during this operation.
Press Tot 1 reversal and digitize a quantity in kg between the
suggested limits. Confirm ( ) and digitize a quantity in pcs
between the suggested limits. Confirm ( ). The belts will stop (if
applicable - automatic versions) during this operation.
After the reversal operations have terminated, the totals will be updated
on the screen and the belts will start again.
6.3 Evolved reversal
See advanced user manual.
6.4 Totals management
6.4.1 Advanced closing
Totalizing always occurs when labelling has terminated correctly and the
summed values are the ones given on the print itself.
It is possible to close the box or pallet in advance of the values set in the
PLU by following the pathway:
Home\Pro\Totals print
.
At this point, a window will appear where the available totals can be
printed (OK) or the operation annulled ( ) as required..
Venus
1-175