Bilanciai FLYNET 100, Инструкция по использованию, обслуживанию и монтажу

Страница: 63 / 125

61
FLYNET 100
5.2.4 Log Management and System Errors
5.2.4.1 Error notification
Allows managing the Managed Framework Log generated by the device.
GENERAL
Log level per file Allows choosing the kind of errors to store.
TRACE = 0
DEBUG = 1
INFO = 2 Additional information log for service
WARNING = 3 warning log
ERROR = 4 error log
FATAL = 5 log of system blocking errors only
Select the desired type of signal, by default it is "ERROR".
Displayed log level Allows selecting which types of errors to display, it is possible to select
"ERROR", "WARNING" or "FATAL".
Display manager Allows selecting on which "object" to display the errors; by default a window
is selected which, in case of error, is overwritten on the work page and in
which the error is displayed.
Log file path Allows selecting where to store the error file "Log file", by default it is in the
memory of the indicator "\NAND_Flash". It is also possible to select another
media, e.g. a USB stick.
EMAIL
Enables email
notification If enabled, it allows sending an e-mail from the indicator to different
recipients.
Email log level Allows choosing which error level to send by email:
•
ERROR
•
WARNING
•
FATAL
Mail to Write here the addresses of the recipients
Mail Cc Write here the addresses of copy recipients
Mail blind cc Write here the addresses of hidden copy recipients
To enable the sending of emails from the indicator, refer to the settings on page of paragraph
5.2.4.2 Device log
Allows selecting the saving location of the Log files generated by the Native Framework of the
device. Available:
4 Hard Disks, 1 Storage Card, 1 nano flash (internal memory of the device).