Bilanciai FLYNET 100, Инструкция по использованию, обслуживанию и монтажу

Страница: 46 / 125

44
FLYNET 100
Tare value
maintenance
Indicate whether the tare must be
maintained also for subsequent weighing
operations
COM Repeater scale connection port
Sartorius Capacity Indicate the maximum capacity of the
Scale
Division Indicate the division used for the Scale
Unit of
measurement
Indicate the unit of measurement used by
the Scale among kg, g , lb , oz, t, tn
Tare activation Select how the Tare is acquired from the
Scale among Enabled, Self-weighing
only, Preset only, Disabled
Tare value
maintenance
Indicate whether the tare must be
maintained also for subsequent weighing
operations
COM Repeater scale connection port
Fulgor Capacity Indicate the maximum capacity of the
Scale
Division Indicate the division used for the Scale
Unit of
measurement
Indicate the unit of measurement used by
the Scale among kg, g , lb , oz, t, tn
Tare activation Select how the Tare is acquired from the
Scale among Enabled, Self-weighing
only, Preset only, Disabled
Tare value
maintenance
Indicate whether the tare must be
maintained also for subsequent weighing
operations
COM Repeater scale connection port
PGE_EHP PGE_EHP
Indicator No. Number of the indicator to be queried.
PGE_EHP
Channel No. Channel number
COM Repeater scale connection port
It is possible to configure the selected COM port directly from this page, simply by clicking on the
relevant COM Configuration key.
5.2.1.1.3 Network scale
The network scale (weight repeater via Ethernet network) is a scale that is not present on board the
indicator. It allows repeating the weight of a scale, among those selectable, which is within the same
network through a preset communication protocol.