Bilanciai Cigiemme MERCURY PLUS, Инструкция по эксплуатации

Страница: 161 / 260

MERCURY PLUS
1-161
✔
Enter as store
Always enter a PLU ID in the BC READ archive, otherwise a
non-valid store indication will be obtained when the piece reaches the
scale.
Besides generating a store, it is also possible (if envisaged in the BC
READ archive) to modify the process fields, which will be considered
as global fields.
Do not overlap use of GLOBAL FIELDS with process field
(considered as global fields) editing via scanner.
Automatic stores can be set (product with confirmation) if the
soft-keys are used, but with the scanner it is also possible to modify
the data before creating the store itself (plu store and data
modification during actual barcode reading).
Note: The first 5 digits read are considered if the BC READ archive is
empty or if none of its elements is associated with the machine
settings.
✔
Enter as process field
The string read is only used for modifying the process fields. When
this setting is activated, a PLU ID must not be entered in the BC
READ archive as it will not be considered and a store will not be
created.
The store must be executed via the serial keyboard or standalone.
The field entered is considered a
global field .
5.16.4 Single product - Note for the installers
In the single product mode, it is NOT POSSIBLE to recall a plu via the
scanner and process it, while it is still possible to modify the process
data and traceability ID.
5.16.5 Properties of the BC Read archive
When a new barcode is read, the machine stops the process, changes
the data and then restarts the process again. The new data will affect
the next piece to be weighed if the updated data item concerns the plu
or traceability lot in progress (process data), while they will affect the
next piece to enter the machine in the case of a global field.
If the selected field belonging to the plu is handled in the global mode,