GUANGDONG ACES MACHINERY CO.,LTD
5
■
Operation Attentions
●
Operation Matters
* Assembly and installation
．
Please follow rules to tighten screws
If over tight, could break the screws or tools. If not tight enough, screws and parts to be
tight could loose and move
．
Do not touch surface of print-head by hand during installation, or it could reduce print
quality
．
Leveling
If not leveled, will cause bad print and Print-head damage
．
Do not drop, hit, crash
It could damage the accuracy of assembly, and make parts malfunction.
．
Make sure tubes and fittings are firmly connected when installing tubes in the machine
If not, could cause air or ink leakage
．
Use an air-gun to blow out dust or dirt before assemble the tubes
Or it could cause parts damage or malfunction
* Operation Condition
．
Do not use it near water place.
Or it could cause error, malfunction. Please use isolation room or chamber.
．
Do not use it near corrosive gases or liquid.
It could cause parts/equipment damage, print-head damage, malfunction
．
Do not use it near electricity surge place.
It could cause damage circuit element or relative parts by electricity-surge equipment
such as electromagnetic elevator, electromagnetic oven, motors etc. Please also separate
the cables from electricity surge of power supply and do not use electricity-surge load.
．
There is no specific tolerance of thunder-strike in CE certification, please set up protection
unit from lightening for the equipment. Excessive interference will change settings even if
this is a CE certificated product.
．
Please install it in a non-quake, non-crash place.
Or it could cause errors and malfunction
．
Please avoid of any wiring debris falling into the equipment
Or it could cause errors and malfunction
．
Do not use it in widely-fluctuate temperature place.
Over the normal temperature, it could effect badly the ink and inner parts of the
equipment.
．
Do not use it in direct sunlight
Shelter from direct sunlight, or could cause errors and malfunction