Page of 2
1
MODEL # BTC-76TD-R
MODEL # BTC-36TD-R
2020 USER’S MANUAL
BIGTIMECLOCKS
1. GENERAL FEATURES
1-702 726-9030
®
• Displays the year, month, day, hour, minute, second and week
• 16 sets of self-shutting alarms, with alarm durations of 10 seconds, 30 seconds or 60 seconds. The default
setting is10 seconds
• 12/24 hour displays
• The display of the seconds can be turned off to feature only hours and minutes.
3. ALARM
2. CLOCK SETUP
•
PRESS Clock returns to Clock mode
•
Press SET to edit the time and date:
•
The year flashes. Enter the desired numerical values using the remote keypad.
•
Press right or left arrows to move to the next / previous value to edit .The setting order is year,
month, day, hour, minute and seconds.
•
Press SET to save and exit the settings. Press EXIT to exit without saving the
settings.
•
In clock mode Press SHIFT to switch between 12h and 24 hours display
•
In clock mode, press MUTE to set the alarms. The alarm icon flashes.
•
An "H" will be displayed in the month position."01" will be displayed in the daily position and flash and
the time is displayed by default as
“--
：
--”
. This means that there is no alarm assigned to the first
alarm group. Press the up arrow or down arrow
to choose the groups of alarms.There are a total of 16
alarm groups.
•
Press SET to set the alarm:
•
The hour flashes. The default value is
“—:—”
. This means the alarm is not enabled. Press the right or
left arrows to select the value to be edited, and use the numerical keypad to enter the desired value.
•
Press SET to save and return to the alarm selection screen. Press EXIT to exit without
saving and return to the alarm selection screen. If the alarm time is set, the alarm icon will always be
on.
•
To cancel the alarm
In the alarm setting mode, select the alarm to be cancelled and press RESET to restore the default
value of the group(
“- -:- -”
). The alarm icon will turn off.
