60
The Bigfoot Unity
™
Diabetes Management System User Guide | Chapter 5
10.
Wait for the App and White Cap display to confirm that the Sensor
was started. Your Sensor requires a 60 minute start-up period
and no Sensor glucose values will display during this time. During
this time, use your Meter to make treatment decisions. Sensor
readings will be available in 60 minutes.
App Display
White Cap Display
Note:
After the 60 minute start-up period but
during the first 12 hours after Sensor insertion,
Sensor readings will be accompanied by a
“Use Meter” message. Whenever “Use Meter”
is displayed on the White Cap, check your
blood glucose with your Meter to confirm the
Sensor reading prior to treatment.
11.
Tap
OK
to continue.
• You will go back to the Set Up Devices screen, with all devices
having a check mark. Tap
Done
to proceed.
The Next Up, Learn to Use Bigfoot Unity screen will be displayed.
A check mark (
) will indicate that the
Set Up Devices
section is
complete.
Example: White Cap
“Use Meter” display
IMPORTANT:
A maximum of 8 hours of glucose data is stored in
the Sensor. To avoid gaps (missing data) in your Sensor glucose
history graph, it is important to scan your Sensor with your White
Cap and bring it within communication range (within 20 feet) of your
App at least once every 8 hours.
