40
The Bigfoot Unity
™
Diabetes Management System User Guide | Chapter 5
Enter Your Glucose Target and Correction Factor
With this option, the Correction Table will fill in when you enter these
two values.
When you enter a Glucose Target or Correction Factor, any previous
Correction Dose Table values will be replaced by new values.
1.
Enter your Glucose Target (100 to
250 mg/dL), then tap
Done
.
Your Glucose Target is the number you
aim for to correct your high glucose. Note
that your Glucose Target may be different
from the glucose value that you typically
like to be at.
2.
Enter your Correction Factor (10 to
250 mg/dL), then tap
Done
.
Your Correction Factor is how much one
unit of rapid-acting insulin lowers your
glucose.
Example: Glucose
Target of 120 mg/dL
