14-17
© 2009 Ver. 2 Fors MW Ltd
www.forsmw.com
23
3. FUNCTIONAL DESCRIPTION
3.1.
HANDLING IN ROLL ON – ROLL OFF
If your BIGAB is equipped with suspension there is no bogie blocking.
Exchange and tipping must be operated from the operator’s seat in the towing vehicle!
Figure 1
Figure
2
Ensure that the position selector
for exchange or tipping is in the
exchange position, not in the
tipping position.
Place the hooklift trailer on a flat surface. The sideways incline may not
exceed 5 degrees.
Under no circumstances may you reverse/exert pressure with the towing vehicle in order to
facilitate exchange. This entails an immediately risk of the trailer or the towing vehicle
being damaged, which can be potentially fatal. The load must be pulled on and the trailer
and the towing vehicle must roll in under the freely suspended load.
Failure to read this instruction manual can be potentially fatal!
