20-24
© 2005 Ver. 1 Fors MW Ltd
www.forsmw.com
35
•
Check if there is enough lubricant on glide surfaces.
•
Clean and lubricate hydraulic cylinders.
•
Check hydraulic hoses for damages.
Recommended lubricants:
BRAND
TYPE
BP
Energrease LS-EP2, L2M
ESSO
Beacon EP2, Multipurpose GR Moly
MOBIL
Mobilux EP2, Mobil Grease MP Special
SHELL
Alvania EP Grease 2
UNION/TEXACO
Marfak Multi-Purpose 2, Molytex Grease 2
5.2.
MAINTENANCE OPERATIONS
IMPORTANT:
BEFORE MAINTENANCE AND SERVICE OPERATIONS READ
AND UNDERSTAND THE SAFETY INSTRUCTION.
During maintenance:
•
Be sure that the trailer is standing on a flat surface.
•
Be sure that the trailer can’t move.
•
When lubrication or servicing the trailer, turn off the vehicle engine.
•
Be sure that the trailer can’t slip when you using support leg, jack or
similar equipment.
•
Always use the security post in tipping position when servicing.
•
Never attempt to do maintenance works on the hydraulic system before
you are sure there is no pressure.
•
Do not tighten or repair leaking hydraulic couplings while the system is
pressurized.
•
Never attempt to localize a leakage from hoses or connections by feeling
with hand. The high-pressure oil jet can penetrate skin and cause serious
burns and damages. High-pressure oil is also highly flammable.
•
Avoid getting oil into eyes. Use safety goggles and gloves. If oil has got
into eyes flush them with cool water, after contact the doctor.
5.2.1.
Surface cleaning
Remove accumulated dust and dirt. Painted outer surfaces should be cleaned
regularly with sponge and soap. When cleaning never use hot water under high
pressure, it will remove the grease from bearings.