20-24
© 2005 Ver. 1 Fors MW Ltd
www.forsmw.com
23
3.2.
HANDLING IN TIPPING
Note!
For the models mentioned in this instruction manual, the maximum container
bridge length is 6.0 m during tipping. Ensure that the towing vehicle and the trailer are
securely coupled before tipping.
Figure 1
Figure 2
Figure 3
Ensure that the trailer is in the tipping position
and not the exchange position before
commencing tipping!
Place the hooklift trailer on a flat surface. The sideways incline may not
exceed 5 degrees.
At maximum tipping – drive slowly forwards until the container bridge is empty.
Lower the container bridge before continuing to drive. Important! Ensure that the
container bridge is locked in the correct position before driving.
IMPORTANT!
When tipping, use the brakes
to ensure that the machine
does not roll away when the
load slides off.
Note! At maximum load, the
telescope must be withdrawn
40 cm (400 mm) in order for
the maximum load to be able
to be tipped.
