UF2SATA35D User's Guide
UF2SATA35D is an USB 2.0 & FireWire (IEEE 1394a) ComBo to SATA external enclosure.
UF2SATA35D is ideally suited for tailgate interface applications for two SATA HDDs. It allows two SATA drives to be connected to
USB 2.0 or FireWire (IEEE 1394a) serial bus in a plug-and-play fashion.
UF2SATA35D provides the perfect solution for data backup and transferring of data between computers using SATA hard disk drives.
Contents
Introduction:
Case & Power Supply:
HDDs Installation Guide:
- For Windows System
- For Mac System
USB Installation:
U2FW-DSATA01DC12 Rev.1.1 Bridge Board:
Introduction
Case & Power Supply
1
1
1
2
3
5
- For Windows System
- For Mac System
1394 Installation:
9
ACT
PWR
- Mobile rack like design
* The housing is designed to provide sliding guide in the inner side
* The inner metal mounting bracket provide the screw hole for two 3.5" SATA HDDs.
* Design to install the SATA HDDs outside the housing
- Provide Power indicator LED (Red color) on the front panel
- Provide SATA Access indicator LED (Blue color) on the front panel
- Power Switch on the rear panel.
- Provide a 40mm X 40mm cooling fan on the rear panel
AC to DC Power Adapter:
- Input: Changeable AC power cord
- Auto-switching
* Input: 100~240Vac, 50~60Hz, 1.7A (Max)
* Output: +12Vdc, 4.16A (Max)
- Output: Standard Walkman-type 2.1 mm DC power plug
- Aluminum Enclosure Design: good heat dissipation
- Easy installation
- Support two 3.5 inch SATA HDDs
- USB 2.0 & FireWire (IEEE 1394a) ComBo interface
- RAID
* Striping : for disks with same capacity.
* Spanning : for disks with different capacity.
Cooling Fan
USB B-Type
Connector
FireWire 6-pin
Connector
DC Jack
Power Switch
Power/SATA Aeecss
indicator LED
