WARNING
!
SERVICE
2006 MASTIFF
MAINTENANCE & STORAGE
61
wire should not go in more than 1/8-inch.
DO NOT ADJUST THE EYES OUT SO FAR AS TO UNCOVER THE CHECKING PIN HOLE. THE HOLE
INDICATES THE END OF THE ADJUSTMENT RANGE. WHEN THE HOLE IS UNCOVERED, THERE
IS NOT ENOUGH THREAD ENGAGEMENT FOR PROPER SAFETY AND FUNCTION.
LENGTH ADJUSTMENTS
To increase the length of the shocks after installation,
loosen the short jam nut and turn the large adjuster nut counterclockwise. The range of
the adjustment is approximately 12 full turns. Alternate between each shock a little at a
time and make sure that they are even. Both adjuster nuts should be flush against the
shock body seal head at the same time.
All manuals and user guides at all-guides.com