5,000 MILE MAINTENANCE:
1. Change engine oil and filter
2. Inspect air cleaner and service as required
3. Inspect petcock fuel filter screen and service as required
4. Change primary drive lubricant / clean magnetic drain plug
5. Check and adjust primary chain
6. Check and adjust the clutch
7. Change transmission lubricant. Clean magnetic plug
8. Check and lubricate throw-out bearing and clutch rod (Bulldog, RSD only)
9. Check and adjust drive belt with rider on bike
10. Inspect brake pads and discs for wear
11. Inspect brake fluid reservoir level and condition
12. Inspect oil lines and brake system for leaks
13. Lubricate: brake and clutch levers - throttle and clutch cables
14. Inspect operation of throttle and enrichener controls
15. Inspect fuel valve, lines and fittings for leaks
16. Check tire pressure - inspect tire and tread for wear and damage
17. Check rear swing arm pivot nut
18. Check all operations of electrical equipment and switches
19. Inspect an or replace spark plugs as needed
20. Check condition of rear shock absorbers
21. Check torque of all fasteners except engine head bolts
22. Check engine idle speed adjustment
23. Clean tappet screen
24. Download ignition module, note settings and rev hits, forward
to Big Dog Motorcycle Customer Service
25. Test Ride
5,000 MILE MAINTENANCE:
1. Change engine oil and filter
2. Inspect air cleaner and service as required
3. Inspect petcock fuel filter screen and service as required
4. Change primary drive lubricant / clean magnetic drain plug
5. Check and adjust primary chain
6. Check and adjust the clutch
7. Change transmission lubricant. Clean magnetic plug
8. Check and lubricate throw-out bearing and clutch rod (Bulldog, RSD only)
9. Check and adjust drive belt with rider on bike
10. Inspect brake pads and discs for wear
11. Inspect brake fluid reservoir level and condition
12. Inspect oil lines and brake system for leaks
13. Lubricate: brake and clutch levers - throttle and clutch cables
14. Inspect operation of throttle and enrichener controls
15. Inspect fuel valve, lines and fittings for leaks
16. Check tire pressure - inspect tire and tread for wear and damage
17. Check rear swing arm pivot nut
18. Check all operations of electrical equipment and switches
19. Inspect an or replace spark plugs as needed
20. Check condition of rear shock absorbers
21. Check torque of all fasteners except engine head bolts
22. Check engine idle speed adjustment
23. Clean tappet screen
24. Download ignition module, note settings and rev hits, forward
to Big Dog Motorcycle Customer Service
25. Test Ride
2005 OWNER’S MANUAL
[
SERVICE & STORAGE 3.13
]
5,000 MILE MAINTENANCE:
1. Change engine oil and filter
2. Inspect air cleaner and service as required
3. Inspect petcock fuel filter screen and service as required
4. Change primary drive lubricant / clean magnetic drain plug
5. Check and adjust primary chain
6. Check and adjust the clutch
7. Change transmission lubricant. Clean magnetic plug
8. Check and lubricate throw-out bearing and clutch rod (Bulldog, RSD only)
9. Check and adjust drive belt with rider on bike
10. Inspect brake pads and discs for wear
11. Inspect brake fluid reservoir level and condition
12. Inspect oil lines and brake system for leaks
13. Lubricate: brake and clutch levers - throttle and clutch cables
14. Inspect operation of throttle and enrichener controls
15. Inspect fuel valve, lines and fittings for leaks
16. Check tire pressure - inspect tire and tread for wear and damage
17. Check rear swing arm pivot nut
18. Check all operations of electrical equipment and switches
19. Inspect an or replace spark plugs as needed
20. Check condition of rear shock absorbers
21. Check torque of all fasteners except engine head bolts
22. Check engine idle speed adjustment
23. Clean tappet screen
24. Download ignition module, note settings and rev hits, forward
to Big Dog Motorcycle Customer Service
25. Test Ride
5,000 MILE MAINTENANCE:
1. Change engine oil and filter
2. Inspect air cleaner and service as required
3. Inspect petcock fuel filter screen and service as required
4. Change primary drive lubricant / clean magnetic drain plug
5. Check and adjust primary chain
6. Check and adjust the clutch
7. Change transmission lubricant. Clean magnetic plug
8. Check and lubricate throw-out bearing and clutch rod (Bulldog, RSD only)
9. Check and adjust drive belt with rider on bike
10. Inspect brake pads and discs for wear
11. Inspect brake fluid reservoir level and condition
12. Inspect oil lines and brake system for leaks
13. Lubricate: brake and clutch levers - throttle and clutch cables
14. Inspect operation of throttle and enrichener controls
15. Inspect fuel valve, lines and fittings for leaks
16. Check tire pressure - inspect tire and tread for wear and damage
17. Check rear swing arm pivot nut
18. Check all operations of electrical equipment and switches
19. Inspect an or replace spark plugs as needed
20. Check condition of rear shock absorbers
21. Check torque of all fasteners except engine head bolts
22. Check engine idle speed adjustment
23. Clean tappet screen
24. Download ignition module, note settings and rev hits, forward
to Big Dog Motorcycle Customer Service
25. Test Ride
2005 OWNER’S MANUAL
[
SERVICE & STORAGE 3.13
]