background image

Big Brand Water Filter Inc.

FS Series Water Filter System Installation Manual

www.bigbrandwater.com Toll Free (888) 426-9488 email:[email protected]

Big Brand Water Filter, Inc. recommends that all systems are installed by a licensed plumber or water
treatment professional.  If you are attempting to install this system on your own without a licensed
professional it is recommended that you familiarize yourself with state and local plumbing codes and only
install your system in a manner that meets all applicable code requirements.

This Water System has been designed for quick and simple installation and maintenance .  By carefully
reading this instruction manual and following the operational guidelines you will insure a successful
installation and reliable operation.  Routine maintenance is essential to the longevity and performance of
the system.  Filters should be changed every three to twelve months depending on the quality of the feed
water supply.

This manual covers the following systems:

FS10S-1

FS10S-2

FS10S-3

FS20S-1

FS20S-2

FS20S-3

FS10B-1

FS10B-2

FS10B-3

FS20B-1

FS20B-2

FS20B-3

Including Mega-Flow, Iron-Max and Sedi-Max models.

System Installation

It is recommended that you securely attach the system to the wall or undersink mounting space.  Use a
stud finder and mount the system to studs or wood beams, not to drywall.  A FS20B-3 system weighs 52
lbs. dry and can weigh as much as 70 lbs when full of water.  If you mount the system to drywall tit may rip
from the wall possibly causing damage.

It is not recommended to hang the system from the pipes.  During filter changes, removing and replacing
the housings will put a side load on the pipe threads and can result in leakage.

All Big Brand Water Filter FS systems have a maximum pressure rating of 90 psi and a maximum
temperature rating of 100 Degrees Fahrenheit.  You must have a pressure regulator installed prior to your
filter system to prevent pressure surges.  It is not uncommon for city water pressure to spike as high as
200 psi.  Pressure spikes can cause the housing to burst and flood your residence/facility.

Содержание FS10S-1

Страница 1: ... feed water supply This manual covers the following systems FS10S 1 FS10S 2 FS10S 3 FS20S 1 FS20S 2 FS20S 3 FS10B 1 FS10B 2 FS10B 3 FS20B 1 FS20B 2 FS20B 3 Including Mega Flow Iron Max and Sedi Max models System Installation It is recommended that you securely attach the system to the wall or undersink mounting space Use a stud finder and mount the system to studs or wood beams not to drywall A FS...

Страница 2: ...em can flow from left to right or from right to left If the flow direction is not correct for your installation as supplied from the factory simply remove the bracket rotate it 180 degrees and reinstall it in the correct direction Note the arrow on the filter housing cap photo to the right showing direction of flow Replacement Filters All Big Brand Water Filter Inc FS filter systems use industry s...

Страница 3: ...ee from leakage 4 Slowly turn on the water supply and check for leaks FS10S Systems If you are installing a drinking water system open the faucet until you smell chlorine then close the faucet for 30 minutes After thirty minutes flush the system by running it for 10 minutes before consuming any water If you still smell chlorine continue to flush the system until the chlorine odor is gone Big Brand...

Страница 4: ...damage Systems or parts covered under the warranty shall be repaired or at our option replaced and returned without charge Big Brand Water Filter Inc FS Series System Warranty Neglecting annual filter changes voids this warranty Failure to perform regular maintenance will cause the system to underperform and may not meet water quality standards FS20S FS10B and FS20B Systems Open the faucet in the ...

Отзывы: