Translation of the original operating manual
Drive units for flexible shafts
- 19 -
GB
Operating MB 20/3 with panel mounted
controller
You can operate the MB 20/3 with an optional panel
mounted controller.
You can operate the device (speed setting with item 3,
switching the device on and off with item 2) entirely with
the panel mounted controller (Fig. 11).
Fig. 11
Panel mounted controller for MB 20/3
To switch on the device, turn the switch (2) clockwise until
you hear a click. To switch off the device, turn the switch
(2) anti-clockwise.
To increase the speed, turn the potentiometer (3)
clockwise. To decrease the speed, turn the potentiometer
(3) anti-clockwise. You can adjust the speed infinitely
between “0" and "10” (Fig. 12).
Fig. 12
Speed control/ON-OFF
