1
Vacuum Drying
Purging
Oven
(Controlled by Microchips with Timing Function)
Operation Manual
Our Lawyers Say:
This is a general-purpose vacuum oven for professional, industrial or educational use.
It is suitable for a working environment where no
flammable, volatile or combustible materials are being heated.
This oven is not intended for hazardous use.
Your satisfaction and safety require a complete understanding of this unit.
Read the instructions thoroughly and be sure all operators are given
adequate training before attempting to put the unit in
service.
This equipment must be used only for its intended application.
Our Design Engineers Say:
Your oven is intended for use indoors, at temperatures between 25°C and 40°C,<
80% Relative Humidity.
Extreme external
temperatures or humidity levels can affect the oven’s ability
to control temperature.
* If sample releases vapor under heating, place a dryer between the vacuum pump and the oven to
avoid vapor damage to the pump.
* Always wear thermal
gloves and protective goggles during operation.
* Always use the power cord that comes with the unit. Never modify the cable.
* Keep oven away from any electromagnetic interference. Do not unplug the oven during normal
operation.
*Do not try to heat flammable/explosive materials or materials that may release corrosive substances.
*When vacuuming is done, the vacuum valve should be closed first before turning off the power to
the vacuum pump; otherwise vacuum pump oil may backflow into the oven.
*Keep the oven clean at all time; clean the glass and chamber with soft cotton cloth after each use.
*If oven is to be kept idle for a long time, protect its circuit board with neutral grease or Vaseline to
avoid corrosion, and cover the oven entirely to keep it away
from dust and moisture.
